Z Series
Zero Waste. Total Control.
Overview
The Z Series is engineered for high-speed, high-efficiency tube
cutting — with a unique zero-tailing system that maximizes every
inch of material. Its dual-chuck design allows for complete tube
utilization, eliminating scrap and boosting productivity with every run.
Key Features
Dual-Chuck Design
Cut from both ends with no waste. The Z Series uses
a dual-chuck system to clamp and process the entire
length of the tube — leaving no unusable tail.
50° Bevel Cutting Capability
Make complex joints easy. Cut precise bevels up to
50° for stronger welds and cleaner assembly.
Wide Tube Size Range ( Up To 6")
One machine. Endless possibilities. Cut tubes up to 6
inches in diameter with precision and ease.
Technical Specifications
| Model number | T3-20AZ | T3-20SZ | T3-20MZ | T6-20SZ |
|---|---|---|---|---|
| Tube size |
Round tube: φ ½”–3” Square tube: ½”×½”–2¼”×2¼" Other tube types: Max external diameter ≤ 2¼" |
------ | ||
| Loading type | Fully automatic | Semi-automatic | Manual feeding | Semi-automatic |
| Automatic feeding length | 196–275 in | 196–275 in | NA | xxx–279 in |
| Manual loading length | Unlimited length | |||
| Chuck rotating speed | 210 RPM | ------ | ||
| Cutting accuracy | ±0.002 in | ------ | ||
| Repeat position accuracy | ±0.001 in | ------ | ||
| Acceleration | 1.53 G | 1 G | ||
| Max tube weighty | 132 lbs | ------ | ||
| Chuck load | 130 lbs | ------ | ||
| Machine weight | 2.5 T | 1.5 T | 1 T | 3.5 T |
| Machine size (L×W×H) | 388×83×79 in | 390×83×79 in | 395×64×79 in | ------ |